previewsolar
THE PREVIEWSOLAR FIELD GUIDE

A clearer path
through your project.

Learn the controls. Follow the workflows. Understand what your results mean.

EXPLORE AT YOUR OWN PACENo account neededThis guide covers Free and both paid packs.

Actual application screenshots · fictional example inputs · select a numbered marker for its explanation.

The guide is open to everyone. Sign in or create a free account when you’re ready to save a project.

01
FREE + PAID

Run your first simulation

Start with a property, choose the conditions, then watch how energy moves through the system.

  1. Open the Solar lab. Free starts with a Single Family Home. An active paid pack enables every supported site type.
  2. Set your location and starter scenario. Expand Site location to search by ZIP, town or address. Use the Scenarios tab to choose an example; save existing work before replacing its assumptions.
  3. Review array, battery and grid settings. Starter values are editable assumptions, not equipment recommendations.
  4. Click Run simulation. Read Run results and use the time scrubber to inspect the recorded day.
The Solar Power Lab · Free example
Enlarge screenshot
The Solar Power Lab · Free example
  1. 1

    Choose the site and location

    Simulation setup holds the site type, location and operating choices. Changing site type loads new starter equipment and loads.

  2. 2

    Run, save, then explore

    Run applies changed inputs. Save scenario keeps your work. Explore My Analysis opens the paid analysis workflow after a completed run is saved.

  3. 3

    Inspect the landscape

    Click the Solar array, Battery, Grid connection or Site loads tile to edit that part of the setup. In analysis mode, these tiles explain the recorded interval.

  4. 4

    Read the numbers together

    Solar AC, site served, battery activity and grid import/export describe the same interval. kW is power; kWh is energy over time.

02
FREE + PAID

Make the setup your own

Change equipment from its landscape tile. Set the time of year in the setup panel.

Battery configuration · editable equipment controls
Enlarge screenshot
Battery configuration · editable equipment controls
  1. 1

    Size storage and power separately

    Capacity is stored energy in kWh. Charge and discharge limits are power in kW. A bigger battery does not automatically have a higher output limit.

  2. 2

    Set the starting charge and reserve

    Initial state of charge starts the run. Reserve and the operating range constrain usable storage; they are not an independent extra battery.

  3. 3

    Apply the change

    Apply battery settings & run recalculates using the edited configuration. Cancel closes the editor without applying your draft.

Solar array

Click Solar array for module count and rating, mounting, tilt, azimuth, shading and losses. Use Apply array settings & run to update the recorded results.

Grid connection

Grid Off prevents purchases, exports and grid charging. Export Off stores surplus where possible, then curtails it. Hybrid uses solar and grid supply, with battery support for grid limits and outages.

Weather & operating assumptions · choose a month
Enlarge screenshot
Weather & operating assumptions · choose a month
  1. 1

    Expand the assumptions

    In Simulation setup, open Weather & operating assumptions near the bottom of the panel.

  2. 2

    Set Month from 1 to 12

    1 is January; 12 is December. The month and latitude affect modeled solar geometry. Set the scenario first, then your month: a new preset resets the month.

  3. 3

    Weather is a separate input

    Temperature, cloud intensity and snow loss remain your assumptions. Choosing a month does not download weather or automatically update appliance schedules.

03
FREE + PAID

Save once. Keep investigating.

A Saved Project connects your property, scenarios, analysis and exported snapshots.

Save this solar scenario · keep setup or results
Enlarge screenshot
Save this solar scenario · keep setup or results
  1. 1

    Match the property type

    Choose a property with the same site type as the simulation. The default option reuses a matching property or creates one, subject to your plan.

  2. 2

    Give this version a useful name

    Names such as “Summer — 10 kWh battery” make comparisons easier. When editing an opened scenario, leave Save as a new scenario unchecked to use its existing slot.

  3. 3

    Save the right state

    Save setup only keeps inputs without completed results. Run changed inputs first if you want recorded results or Interactive Project Analysis.

  4. 4

    Save to your account

    After saving, the scenario list refreshes. Reopen from Saved runs or My Projects; you do not need to search through PDF files.

  1. Run → Save scenario. Sign in or create a free account if prompted. Review the property and name, then choose Save to my account.
  2. Return through My Projects. Simulation reopens the saved setup and recording. Paid users can open its Interactive Analysis.
  3. Keep distinct alternatives. Save as a new scenario uses another slot. Updating the same opened scenario does not.
04

Build a realistic load schedule

Use sourced equipment examples as a starting point, then match the power and timing to your actual use.

Add a load · published example and editable schedule
Enlarge screenshot
Add a load · published example and editable schedule
  1. 1

    Search by equipment name

    Open Site loads → Add load. Type a name to see autocomplete suggestions relevant to your site; Search all broadens the lookup.

  2. 2

    Read the source and rating basis

    Selecting an example fills a published power value. Rated or maximum input is not necessarily average consumption. Check the linked source and equipment mode.

  3. 3

    Customize the schedule

    Set power, duty, start/end time, critical status and solar-surplus-only behavior. The default time window is a placeholder, not a researched usage pattern.

  4. 4

    Add, then apply

    Add to load schedule first, then Apply loads settings & run. If nothing matches, enter a custom load with your own values.

Free household demand

Free uses a basic household profile. Click Site loads to scale it with a demand multiplier: 0.5× halves demand and 2× doubles it. Detailed appliances and EV charging require a paid pack.

Schedules and CSV

Up to 12 individual rows can be modeled. Equal start/end times mean all day. A 24-hour CSV replaces the individual schedule and repeats daily; it does not add to it.

05

Open the living analysis workspace

Run and save a completed simulation, then select Explore My Analysis beside Run simulation. It opens in a large modal.

Interactive Project Analysis · your saved project workspace
Enlarge screenshot
Interactive Project Analysis · your saved project workspace
  1. 1

    Navigate by question

    Overview, Energy, Solar, Battery, Grid, Economics and other sections organize your investigation. Navigation adapts to the system and project intent.

  2. 2

    Set your project intent

    Decision Analysis, Professional Installation, DIY / Hybrid or Compare DIY vs. Professional changes planning content without rerunning the original simulation.

  3. 3

    Distinguish missing and modeled values

    Metrics come from the recorded run. Missing costs or annual estimates stay unavailable until the necessary inputs and calculations exist.

  4. 4

    Return to your simulation

    Close the modal or use Return to simulation to change equipment and rerun. If analysis edits are unsaved, choose Keep editing or explicitly discard them.

Replay the energy day

In Overview or Energy, use Play, Pause, Speed and the time scrubber. The landscape and interval values use the same simulation results. Click a landscape tile to inspect that interval.

Unlock seasonal replays

For a normally grid-connected run, open Assumptions and select Generate an illustrative year and four seasonal replays. Export the Project Decision Report to save and recalculate, then return to Energy to switch seasons.

06

Compare options. Make the assumptions visible.

Investigate trade-offs using your objective and inputs; the application does not choose a universally best system.

COMPARE

What changes with another setup?

Save completed alternatives, then select up to three other scenarios in Analysis → Compare. Export to refresh the comparison. The simulator’s Scenarios tab also offers paired battery-size experiments.

ECONOMICS

What does the project cost?

Enter your budget and relevant financial assumptions. Cash-flow previews respond immediately. Payback and longer-term estimates require enough inputs; no break-even is shown explicitly when modeled.

MARGINAL VALUE & RISK

What does more capacity buy?

Review modeled battery increments, incremental costs and sensitivity findings. Supply unit costs where needed. Risk uses deterministic sensitivity cases, not probability forecasts. Monte Carlo analysis is not provided.

RESILIENCE

What happens without the grid?

Use Resilience or the analysis outage controls where available. Check island-capable equipment, initial charge and critical loads. Use a 6–168-hour modeled window in analysis and export to recalculate a changed duration.

DIY / INSTALLATION

How would this get built?

Set a professional, DIY or compare intent to reveal implementation content. Review the scope matrix, preliminary equipment categories, DIY/pro assumptions and project roadmap. Export saves planning progress.

QUOTES

How does a proposal compare?

Enter a proposal or import/paste text or JSON. Review extracted fields, confirm verification and add the proposal. Use verified total as budget only when intended. Quote capacities do not resize the simulation.

07

Take a credible snapshot with you

The Interactive Project Analysis is the working experience. The PDF Project Decision Report preserves one particular state of that analysis.

Report section · save, recalculate and export
Enlarge screenshot
Report section · save, recalculate and export
  1. 1

    Open Report in the analysis

    Use the Report section in the analysis navigation. This is separate from the simpler Export PDF action in Run results.

  2. 2

    Export Project Decision Report

    One click saves your current analysis edits, recalculates derived findings and generates the PDF. Wait for the download to finish.

  3. 3

    Keep the snapshot traceable

    Each export includes its generation time, project, scenario and analysis versions, engine version, report ID and assumptions timestamp.

  1. Review your inputs. Verify any proposal draft, enter either all 12 monthly totals or none, and review missing assumptions.
  2. Open Report → Export Project Decision Report. This is also how you save analysis edits and refresh annual, comparison and other derived results.
  3. Find earlier snapshots in My Projects → Reports. A downloaded PDF works offline and does not change when your living project changes.
08
FREE + PAID

Keep your work organized

Your account holds the properties, saved scenarios, access dates, support conversations and security settings.

My Projects · reopen work and retrieve snapshots
Enlarge screenshot
My Projects · reopen work and retrieve snapshots
  1. 1

    Start with the property

    A Saved Project groups scenarios for a property and preserves its site type.

  2. 2

    Reopen simulation or analysis

    Simulation takes you back to the equipment and run. Open Interactive Analysis returns to the investigation workspace when access and saved results permit.

  3. 3

    Retrieve previous PDF snapshots

    Expand Reports for dated exports. These historical files remain separate from the current living analysis.

What is included?
WorkflowFreeEither paid pack
PropertiesOne active single-family propertyAll supported site types
Saved scenariosThree eligible basic scenariosExpanded allowance shown in My account
Demand & run windowBasic household profile; up to 24 hoursDetailed schedules, EV loads and runs up to 168 hours
ResultsBasic results and visible assumptionsInteractive analysis, comparisons, planning and PDF exports

Both paid packs include the same advanced tools. Project Pack lasts 30 days; Enterprise Pack lasts one calendar year. Review the current price and dates in My account before continuing to PayPal. Packs are one-time purchases with no automatic renewal.

Use My account → Account security to change your password; keep your recovery code safely. Use the support form for account or payment questions. Logout ends your session. Help remains available from the solar lab whether or not you are signed in.

WHEN SOMETHING ISN’T CLEAR

Common questions

Why did my settings change?

Site-type changes apply new system and load presets. Scenario presets can replace month, weather, schedules, shading, dispatch or export assumptions. Save a separate scenario before experimenting, then check the visible inputs.

Why can’t I open my analysis?

It needs a completed, saved simulation and an active paid pack for new calculations. A setup-only save has no results. Run and save it, then choose Explore My Analysis.

Why are annual savings or payback unavailable?

The analysis avoids inventing values. A normally grid-connected project needs illustrative annualization and sufficient financial inputs. Review Assumptions and Economics, then export to save and recalculate.

Why can’t I export my edited analysis?

An incomplete quote draft or invalid monthly consumption list blocks export. Verify and add the quote or clear the draft; enter exactly 12 nonnegative monthly totals or leave the list empty. An active pack is required.

Can I close analysis without saving?

Yes, but draft changes are discarded only when you confirm that choice. To keep them, use Report → Export Project Decision Report before closing.

Where can I see assumptions and sources?

Use the question-mark tooltips, Evidence library and Model assumptions & sources in the simulator. Load suggestions link to their published rating sources. Analysis → Assumptions records the inputs, source status and calculation purpose.

Guide reviewed September 28, 2026. Screens use fictional data and may show the previous site name. The workflows also apply to PreviewSolar; your project values and available sections may differ.